Information

Viewed products

Auxiliary Fan Controller Kit for Radiator

RLP0090

New product

Use this controllwe to add an auxiliary fan to your motorcycle or car for backup radiator cooling

More details

Data sheet

Quantity provided1 unit
Operating Voltage12 volts DC
Do It Yourself (DIY)DIY Possible
DIY difficultyDifficult
Fastening hardware for installationNot provided
Country of originImported & Sold in India
Weatherproof Waterproof rating (Ingress Protection IP)IP20 , Not weather / water proof
Warranty for this productNo warranty
User Guide URLOnline PDF user guide provided
Type of packingHard plastic box

More info

PROBLEM:

You want to add an auxilary fan to the motorcycle and need to turn it on based on certain temperature

SOLUTION:

Add this controller to the fan and program it as per your requirements.

KIT CONTENTS:

  • Programmable relay controller board

CONTROLLER SPECIFICATIONS:

  • Temperature control range: -50 ~ 110 ° C
  • Resolution: -9.9 to 99.9 is 0.1° C , 1 ° C temperature ranges other
  • Measurement Accuracy: 0.1 ° C
  • Control accuracy: 0.1 ° C
  • Hysteresis accuracy: 0.1 ° C
  • Refresh rate: 0.5 S
  • Input Power: DC12V
  • Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M wire length
  • Output: 1 Channel relay output, capacity = 10A
  • Environmental requirements: -10 ~ 60 degree Humidity 20% -85%
  • Size: 48 (L) * 40 (W) * 14 (D) mm
  • Power consumption: Relay off (NO) current:<=35MA, Relay active (NC) current:<=65MA

NOTE:

  • Some basic assembly required
  • All steps provided in user manual
  • RedLinePlus PnP Relay Wiring Harness suggested to be used along with this kit.
  • Auxiliary fan not provided. Most suitable is a KTM Duke 200 (2014 old type) fan without shroud/cover. Any other DC fan made for automotive radiator cooling will do. Wattage must be less than 80W.
  • Not tested for 4 wheeler usage - may work with considerations



10 other products in the same category: